Low Ceiling? No Problem!

How tall are your ceilings?

9' or higher

GP-7LCS

Fits in garages with ceilings as low as 9 feet and still offers an impressive 58" max rise.

Lifting Capacity	7,000 lbs.
Overall Height	106.5"
Overall Width	125"
Max. Rise	58"

View full specs

FREE SHIPPING

How To Purchase

10' or higher

GP-7LC

A slighty taller version, accommodating ceilings as low as 10 feet while offering a 68" rise.

Lifting Capacity	7,000 lbs.
Overall Height	118.5"
Overall Width	125"
Max. Rise	68"

View full specs

FREE SHIPPING

How to Purchase

13' or higher

GP-7

Our standard-height model is fit for garages with 13' ceilings and offers a full 78" max rise.

Lifting Capacity	7,000 lbs.
Overall Height	150"
Overall Width	125"
Max. Rise	78"

View full specs

FREE SHIPPING

How to Purchase

What Makes GrandPrix Different Than Other Two-Post Lifts?

Without exaggeration, the GrandPrix is the first and only two-post lift to offer the low-profile benefits of a scissor lift with the working comfort of a full-rise lift.

GrandPrix vs. Other Lifts

About GrandPrix

GrandPrix isn't a start-up-from-the-ground-up operation, so we've been able to hit the ground running in terms of production and distribution. In fact, our low-ceiling home garage car lift operation is also a BendPak operation. BendPak is the world's largest manufacturer of lifts and automotive service equipment, so the fact our names are connected means customers get to experience a revolutionary lift with the steady backing of a globally trusted brand.

The same important pride of construction that goes into BendPak products goes into the GrandPrix. GrandPrix was designed by the same engineers who design BendPak lifts, and it’s manufactured in the same facilities. GrandPrix offers the same incredible, innovative technology that BendPak buyers have come to expect.

All Downloads

Brochure

Sales Flyer

Manual

How to Purchase GrandPrix

Have questions? Ready to start your next project with GrandPrix? Fill out the contact form below, and we’ll be in touch soon to help you out!

Contacting GrandPrix

GrandPrix is a division of BendPak. Contact us by phone or email to be connected with one of our product specialists.

(800) 253-2363

sales@bendpak.com

Santa Paula, CA

Lifting Capacity	7,000 lbs.
A - Rise:	54" (1,372 mm)
B - Rise + Pad Only:	58" (1,473 mm)
C - Rise + Pad + 63 mm Adapter:	66" (1,676 mm)
D - Min. Height + Pad:	4.5" (114 mm)
E - Height Overall:	106.5" (2,705 mm)
F - Width Overall:	125" (3,175 mm)
G - Outside Columns:	119.5" (3,035 mm)
H - Inside Columns:	110" (2,794 mm)
I - Drive-Thru Clearance:	89.5" (2,273 mm)
J - Floor To Overhead Switch:	96" (2,438 mm)
K - Front Arm Reach: (MIN)	26" (660 mm)
K - Front Arm Reach: (MAX)	42" (1,067 mm)
L - Rear Arm Reach: (MIN)	26" (660 mm)
L - Rear Arm Reach: (MAX)	47.5" (1,207 mm)
Max Load Per Arm	1,750 lbs. (794 kg)
Motor	220 VAC / 60 Hz / 1 Ph
Noise	45dB
Time to Full Rise:	45 seconds

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

Lifting Capacity	7,000 lbs.
A - Rise:	64" (1,626 mm)
B - Rise + Pad Only:	68" (1,727 mm)
C - Rise + Pad + 63 mm Adapter:	76" (1,930 mm)
D - Min. Height + Pad:	4.5" (114 mm)
E - Height Overall:	118.5" (3,010 mm)
F - Width Overall:	125" (3,175 mm)
G - Outside Columns:	119.5" (3,035 mm)
H - Inside Columns:	110" (2,794 mm)
I - Drive-Thru Clearance:	89.5" (2,273 mm)
J - Floor To Overhead Switch:	108" (2,743 mm)
K - Front Arm Reach: (MIN)	26" (660 mm)
K - Front Arm Reach: (MAX)	42" (1,067 mm)
L - Rear Arm Reach: (MIN)	26" (660 mm)
L - Rear Arm Reach: (MAX)	47.5" (1,207 mm)
Max Load Per Arm	1,750 lbs. (794 kg)
Motor	220 VAC / 60 Hz / 1 Ph
Noise	45dB
Time to Full Rise:	45 seconds

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

Lifting Capacity	7,000 lbs.
A - Rise:	74" (1,880 mm)
B - Rise + Pad Only:	78" (1,981 mm)
C - Rise + Pad + 63 mm Adapter:	86.5" (2,197 mm)
D - Min. Height + Pad:	4.5" (114 mm)
E - Height Overall:	150" (3,810 mm)
F - Width Overall:	125" (3,175 mm)
G - Outside Columns:	119.5" (3,035 mm)
H - Inside Columns:	110" (2,794 mm)
I - Drive-Thru Clearance:	89.5" (2,273 mm)
J - Floor To Overhead Switch:	140" (3,556 mm)
K - Front Arm Reach: (MIN)	26" (660 mm)
K - Front Arm Reach: (MAX)	42" (1,067 mm)
L - Rear Arm Reach: (MIN)	28" (711 mm)
L - Rear Arm Reach: (MAX)	47.5" (1,207 mm)
Max Load Per Arm	1,750 lbs. (794 kg)
Motor	220 VAC / 60 Hz / 1 Ph
Noise	45dB
Time to Full Rise:	45 seconds

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.